Description
This is the PC Interface for the Futaba MC401CR (FUTM0905), MC601C (FUTM0910) and the MC850C (FUTM0950) Programmable Speed Controls.
Features: - Setting Data Read-reads the program setting data of the connected ESC
- Setting Data Write-writes data to the ESC
- Default Data Write-writes standard data from the factory
- Get Data-reads the program data when connected to ESC
- Clear Data- clears data from the ESC
Includes: PC Interface with interface to ESC extension Requires: PC with USB type A port. Software can be downloaded free from www.futaba-rc.com Comments: Requires PC with Windows® Vista 32bit, XP 32bit, Windows® 7 32bit, or Windows 2000 system and USB port
Specifications
Interface: USB Rev1.1 compliant 500mm extension included with the CIU-2 to connect to your ESC USB Connector: USB series A connector Operating Voltage: 5V ± .2V (USB bus power) Current Drain: At connection idle; 12.3 ± 2mA Operating Environment: Temperature -10 ~ 50°C Dimensions: .72 x 2.22 x .35" (18.2 X 56.5 X 9mm) Weight: .26oz (7.5g) | 
